無線射頻識別技術


 

RFID Antennas射頻天線


RFID XR440 & 480

RFID AN400

RFID AN480

 

 

RFID TAG 射頻晶片標籤

RFID Tag

 

 

Wireless無線傳訊點

AP-5131 Access Point

AP-5181 Access Point

AP-300 Access Port

 

Wireless Brigdes & Cards

CB3000

LA5127

LA5137

LA4137

 

RF Switch

RFS7000

WS5100

WS2000

 

Bridges & Adapters

ES3000

 

 

 

RFID & Wiress Infrastructure

射頻識別 & 無線系統建設

RFID Antennas 射頻天線

XR440 & XR480

Industrial-class RFID reader delivers maximum functionality and benefits

Next generation performance and manageability

Dimensions: 22cm L x 30cm W x 5cm H
Weight: 2.27kg
Base Material: Die-cast aluminum
Visual Status Indicators: LEDs power(green), activity (yellow) error (red)
Network: 10/100 BaseT Ethernet – RJ45
External interfaces: Control I/O (12) – DB15; USB Host – USB; RS232 Serial Console – DB9 Control I/O (12) – DB15; USB Host – USB Type A; USB Client – USB Type B; RS232 Serial Console – DB9
RF Connectors: Reverse TNC 8 Reverse TNC
Read Points: 4 read points (4 transmit points, 4 receive points) Up to 8 read points in single-port mode; up to 4 read points in dual-port mode
Power Supply: +24v DC @ 1.2 amps
Operation Temperture: -20° to +70° C
Environmental Sealing: IP53 N/A
Memory: Flash 64 MB; DRAM 64 MB
Operating system: Win CE (Version 5.0)
Firmware upgrade: Web-based and remote firmware upgrade capabilities
Management Protocols: SNMP support and AirBEAM level 2 support SNMP support and future support for MSP
Tag Protocol: EPC Gen 2 (Dense Reader Mode)
Frequency: UHF band, 902-928 MHz US UHF band, 865.7 – 867.5 MHz
Method: Frequency Hopping Spread Spectrum
Power Output: Up to 30 dBm
Air Link Protocol: EPC Gen 2 (Dense Reader Mode)
Synchronization: Network Time Protocol
IP addressing: Static and dynamic
Host Interface Protocols: XML and Byte Stream

HOT LEVEL !!   *****

________________________

RFID DEVICE ~AN400

AN400 High-Performance Area Antennas for High-Capacity, High-Throughput Environments

High-Performance Area Antennas are general-purpose antennas for long range and large area RFID tag reading. Optimized to perform in all environments, these area antennas are easy to mount on ceilings and walls to create superior read zones around shelves, doorways and dock doors – anywhere boxes and pallets are moving into and out of a facility.

Dimensions: 28.3 in. L x 12.5 in. W x 1.5 in. D
Weight: ~8 pounds (~3.6 Kg)
Casing: Aluminum with poly carbonate cover
Polarization: Two circular polarized patch array
Operating Temperature: +32° to +122° F/0° to +50° C
Storage Temperature: -4° to +158° F/-20° to +70° C
Connectors: 2 type “N” female connectors
Voltage Standing Wave Ratio (VSWR): 1.25
Isolation –db: -37
3db Beam Width: 60°
Gain in dBi linear: 6.0

HOT LEVEL !!   *****
________________________

AN480 Single Port RFID Antenna

AN480: Single Port Antenna for Worldwide Use. Support for a wide frequency range (865–956 MHz) for worldwide RFID deployments

IP54 sealing for reliable performance throughout the enterprise — indoors and outdoors

The AN480 Single Port Antenna offers maximum performance and flexibility. The low axial ratio is nearly 50 percent lower than typical competitive devices, delivering a more uniform gain — and better performance. The wide frequency range enables this antenna to be utilized in worldwide deployments, providing cost-efficiencies and a simplified RFID infrastructure. The antenna offers the environmental sealing required to enable indoor and outdoor use. As with all Symbol antennas, the AN480 uses Symbol's standard mounting bracket — mounting the antenna for the first time or upgrading an existing Symbol antenna with the AN480 is fast and easy.

Dimensions: Without mounting screws:
10.2 in. L x 10.2 in. W x 1.32 in. D
25.91 cm L x 25.91 cm W x 3.35 cm D

Without mounting screws:
10.2 in. L x 10.2 in. W x 1.98 in. D
25.91 cm L x 25.91 cm W x 5.03 cm D

Weight: 2.5 lbs/1.13 kg
Polarization: LHCP and RHCP
User Environment
Frequency: 865-956 MHz
Environmental Sealing: IP54
Connectors: Type "N" female
Max. VSWR Free Space: 1.22:1
Max. VSW Ground at .15 Meter: 1.3:1
Nominal Impedance: 50 Ohm
Horizontal 3 dB Beam Width: 65°
Vertical 3 dB Beam Width: 65°
Gain: 6 dBil max.
Axial Ratio: 1.5 dB max.
DC Resistance: 10K Ohm
Front to Back Ratio: 18 dB
Power: 2 Watts
Transport Vibration: IEC-68 series
UV Rating: F2 per UL 746C

HOT LEVEL !!   *****

________________________

RFID TAG 射頻晶片標籤

RFID Tag

Rely on all-weather RFID tags for demanding cargo and asset tracking applications.
You need an RFID tag that will endure exposure to the elements (and more) if you plan on using it outdoors — especially for demanding cargo and asset tracking applications.

Get the durability designed to withstand 24-hour-a-day exposure to nearly any environmental condition with an all-weather RFID Cargo Tag from Symbol. And with our patented tag technology, you also get accurate, fast and reliable read performance for your enterprise applications.

Features and benefits of the RFID Cargo Tag:

Rugged design tolerates natural and incandescent light, vibration, shock, rain, dust, oil and chemicals

Flexible mounting options enable attachment to nearly any flat surface — including metal, plastic and wood

Read range of up to 40 ft./12.19m

Compatible with any Gen 2 EPC? RFID system

96-bit memory with 16-bit control, for lock and kill features, increases security of onboard data

Battery-free, maintenance-free passive technology for reduced cost of ownership

Tag Dimensions: 6 in. H x 6 in. W x 0.53 in. D
152.4mm H x152.4mm W x 13.46mm D
Mounting Hole Size: 0.28 in. / 7.1mm
Mounting Hole Placement: 5.00 in. / 127mm square pattern
Recessed area for optional label: 4 in. x 4 in./101.6mm x 101.6mm
Weight: 9.8 oz. / 278 g
Packaging: 30 tags per case (minimum order quantity: 1 case)
Life of Tag: Up to five years under recommended conditions
Performance Quality: 100% tested with edit
Operating Frequency: UHF band, 860-960 MHz
RF Air Protocol: EPCglobal Gen 2, Class 1
Functionality: Read/write (user programmed); full duplex protocol
Memory: 96-bit with 16-bit control for lock and kill features
Memory - Expected Read/Write Cycles: Up to 10,000 under normal circumstances
Read Rate: Up to 400 per second under normal circumstances
Read Distance1: Up to 20 ft./6.09 m (865.6 MHz - 867.6 MHz)
Up to 40 ft./12.19 m (902 MHz - 928 MHz)
Up to 45 ft./13.71 m (952 MHz - 954 MHz)
Write Distance: Up to 10 ft. / 3.05m
Polarization: Wide beam; polarization diverse
Recommended Application for Antenna Efficiency: Metal, plastic, wood, or other flat surfaces

HOT LEVEL !!   *****
________________________

 

Wireless Infrasturcture 無線系統建設

Access Port & Point

Access Ports and Access Points provides the point of connection between your wireless LAN and your mobile devices — including laptops, bar code scanners, handheld mobile devices and more — for first- and second-generation wireless LANS. Access Points provide on-board intelligence, while thin Access Ports work in conjunction with Motorola's wireless switch family, including the WS5100, WS5000 and WS2000. Both Access Ports and Access Points are easily added to your wireless LAN to increase capacity to support the increased bandwidth needs of a growing workforce, as well as more robust coverage, or coverage in new areas of the enterprise.

AP-5131 Access Point Get secure enterprise-class networking for branch offices, remote and outdoor locations, and small businesses — in one device. Fast enough to support demanding applications and simple to deploy.

Secure enterprise-class networking for branch offices, remote and outdoor locations, and small businesses — in a single device

AP-5131 Specification Highlights

Physical Characteristics User Environment Power Specifications Radio Specifications Regulatory
Dimensions: 5.32 in. L x 9.45 in. W x 1.77 in. H/135 mm L x 240 mm W x 45 mm H
Weight: 1.95 lbs/0.884kg
Housing: Metal, plenum-rated housing (UL2043)
Available Mounting Configurations: No additional hardware required to mount on desktop, above drop ceiling, under ceiling or on wall
LEDs: 4 top mounted LEDs, 2 bottom mounted LEDs, with multiple modes indicating 802.11a/802.11g activity, power, adoption and errors
Uplink: 2 ports (WAN, LAN) Auto-sensing 10/100Base-T Ethernet
Operating Temperature: -4°F – 122°F/-20°C to 50°C
Storage Temperature: -40°F to 158°F/-40°C to 70°C
Operating Humidity: 5 to 95% RH non-condensing
Operating Altitude: 8000 ft./2438m @ 82°F/28°C
Storage Altitude: 15000 ft./4572m @ 53°F/12°C
Electrostatic Discharge: 15kV air, 8kV contact
Operating Voltage: 48V DC
Operating Current: 200mA
Integrated Power OverEthernet Support: 802.3af on LAN Port
Wireless Medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM)
Network Standards: 802.11a, 802.11b, 802.11g, 802.3
Data Rates Supported: 1, 2, 5.5, 6,9, 11, 12, 18, 24, 36, 48, 54 Mbps
Operating Channels: Chan 1-35 (4920 – 5825 MHz)
Chan 1-13 (2412-2472 MHz)
Chan 14 (2484 MHz) Japan only
Actual operating frequencies depend on regulatory rules and certification agency
Available Transmit Power Settings: 4-20 dBm
Operating Bands: FCC 2.412 to 2.462 GHz
5.150 to 5.250 (UNII -1)
5.250 to 5.350 (UNII -2)
5.725 to 5.825 (UNII -3)
5.725 to 5.850 (ISM)
EU 2.412 to 2.472 GHz
5.150 to 5.250 GHz
5.150 to 5.350 GHz
5.470 to 5.725 GHz (Country Specific)
Japan 2.412 to 2.484 GHz
4.900 to 5.000 GHz
5.150 to 5.250 GHz
Receiver Sensitivity Radio .11a (dBm) 10% PER for 1000 bytes
IEEE 802.11a sect 17.3.10.1 (MIN) & 17.3.10.4 (MAX)
6 Mbps -91
9 Mbps -89
12 Mbps -87
18 Mbps -83
24 Mbps -81
36 Mbps -78
48 Mbps -74
54 Mbps -73
Radio .11g (dBm) @ 10% PER for 1,000 Octets
IEEE 802.11g sect 19.5.1 (MIN) & 19.5.3 (MAX ) 		6 Mbps -89
9 Mbps -88
12 Mbps -85
18 Mbps -82
24 Mbps -80
36 Mbps -77
48 Mbps -72
54 Mbps -70
Radio .11b (dBm) @ 8% PER for 1,024 Octets 1 Mbps -94
2 Mbps -90
5.5 Mbps -88
11 Mbps -84
Standards Compliance: Wi-Fi: 802.11a/b/g, WPA2, WMM
Product Safety Certifications: UL / cUL 60950-1, IEC / EN60950-1, UL2043, TUV GS, RoHS
Radio Approvals: FCC (USA), Industry Canada, CE (Europe), TELEC (Japan) *
Part Numbers Single Radio 802.11a/g Dual Radio 802.11a+g Dual Band antenna PoE supply
AP-5131-40020-WW ●
AP-5131-40021-WWR ● ●
AP-5131-40022-WW ● ● (x2)
AP-5131-40023-WWR ● ● (x2) ●
AP-5131-13040-WW ●
AP-5131-13041-WWR ● ●
AP-5131-13042-WW ● ● (x4)
AP-5131-13043-WWR ● ● (x4) ●

HOT LEVEL !!   *****
________________________

AP-5181 Access Point Deliver enterprise-class wireless networking in harsh environments

A complete outdoor access point

AP-5181 Specification Highlights

Physical Characteristics User Environment Power Specifications Radio Specifications Regulatory
Dimensions: 12 in. L x 8.2 in. W x 3.55 in. H/305 mm L x 210 mm W x 89 mm H
Weight: 5.50lbs/2.50kg
Housing: Die cast aluminum alloy; NEMA 4X-modified; IP56
Available Mounting Configurations: Pole and wall mounting kit; Protective heavy weather mounting kit; Light pole power transformer kit
LEDs: 4 back-mounted LEDs, indicating radio activity, power, adoption and errors
Uplink: 2 ports (WAN, LAN) Auto-sensing 10/100Base-T Ethernet
Operating Temperature: -22°F – 131°F/-30°C to 55°C
Storage Temperature: -40°F to 185°F/-40°C to 85°C
Operating Humidity: 5 to 95% RH non-condensing
Operating Altitude: 8,000 ft./2438m @ 82°F/28°C
Storage Altitude: 15,000 ft./4572m @ 53°F/12°C
Electrostatic Discharge: IEEE 61000-4-2, 20kV air, 8kV contact
Weather rating: IP56 weather-tight, NEMA 4X-modified
Wind survivability: >170 mph, 148 knots (without antenna)
Wind loading (165 mph): <60 lbs, 267 Newtons (without antenna)
Shock & vibration: MIL-STD-810F method 514 procedure 1
Transportation/Cargo ASTM D775-80 D4169 level 3
Operating Voltage: 48V DC
Operating Current: 280mA
Integrated Power-Over-Ethernet Support: 802.3af on LAN Port
Wireless Medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM)
Network Standards: 802.11a, 802.11b, 802.11g, 802.3
Data Rates Supported: 1, 2, 5.5, 6,9, 11, 12, 18, 24, 36, 48, 54 Mbps
Operating Channels: Chan 32-165 (5180 – 5825 MHz); Chan 1-13 (2412-2472 MHz)
Actual operating frequencies depend on regulatory rules and certification agency
Operating Bands:

FCC:
2.412 to 2.462 GHz
5.150 to 5.250 (UNII -1) 1
5.725 to 5.850 (ISM)
1 Indoor use only

EU:
2.412 to 2.472 GHz
5.150 to 5.250 GHz 1
5.250 to 5.350 GHz 1
5.470 to 5.725 GHz
(Country Specific)
1 Indoor use only

Receiver Sensitivity:

Radio .11a (dBm) 10% PER for 1,000 bytes IEEE 802.11a sect 17.3.10.1 (MIN} & 17.3.10.4 (MAX)
6 Mbps: -91
9 Mbps: -89
12 Mbps: -87
18 Mbps: -83
24 Mbps: -81
36 Mbps: -78
48 Mbps: -74
54 Mbps: -73

Radio .11g (dBm) @ 10% PER for 1,000 bytes IEEE 802.11g sect 19.5.1 (MIN) & 19.5.3 (MAX)
6 Mbps: -89
9 Mbps: -88
12 Mbps: -85
18 Mbps: -82
24 Mbps: -80
36 Mbps: -77
48 Mbps: -72
54 Mbps: -70

Radio .11g (dBm) @ 8% PER for 1,024 bytes
11 Mbps: -84
5.5 Mbps: -88
2 Mbps: -90
1 Mbps: -94

Available Transmit Power Settings: 4-20 dBm
Antenna Protection: Transient IEEE 61000-4-4, level 4, EFT; Surge IEEE 61000-4-5 Class 5, 1.2x50uS & 8x20uS Waveform
Standards Compliance: 802.11a/b/g, 802.11i, WPA2, WMM, UAPSD
Product Certifications: UL / cUL 60950-1, IEC / EN60950-1
Radio Approvals: FCC (USA), Industry Canada, CE (Europe)

AP-5181 Part Numbers and Product Descriptions

Part Number Description
AP-5181-13040-WWR AP-5181 802.11a+g
KT-5181-HW-01R AP-5181 Heavy Weather Kit
KT-5181-WP-01R AP-5181 Wall/Pole Mounting Kit
AP-PSBIAS-5181-01R 48V Transformer and Power Surge Protector

HOT LEVEL !!   ***** ________________________

 



AP300 Access Port Ease wireless LAN deployment and implementation while increasing features and security with a low-cost access point providing powerful wireless LAN manageability and scalability at the enterprise level.

Thin AP Design

The AP300, as all other Motorola Access Ports, requires no configuration or manual firmware maintenance. The Motorola Wireless Switch discovers access ports on the network and automatically downloads all configuration parameters and firmware, greatly reducing installation, maintenance and troubleshooting costs

Dual form-factors Plenum-rated external antenna model with metal housing is ideal for installation above ceiling tiles; the plastic internal-antenna housing allows for installation within the ‘carpeted-space' and provides cost effective coverage via the integrated 2.4 GHz and 5.2 GHz antennas
Interoperability Standards-based wireless, wired and security protocols ensure interoperability with third-party hardware
802.1x supplicant Allows authentication to a RADIUS server to enable an 802.1x-protected Ethernet port
802.11h Enables worldwide operation through support for standards-based dynamic frequency selection and power control
802.11i Support for IEEE standards-based security protocols for strong Encryption (AES, TKIP), Authentication and Key Management (802.1x-EAP)
Flexible mounting options Fast and easy installation with wall, ceiling and above-ceiling tile mounting options; internal antenna version snaps on to T-bars of suspended ceilings without the use of any hardware; external antenna version installs above ceiling tiles
802.3af Simplifies and reduces total cost of installation through support of standards-based Power-over-Ethernet (PoE)
Load Balancing, Pre-Emptive Roaming and Rate Scaling Increases reliability and resilience of the wireless network to support mission critical applications

Specification Highlights

Physical Characteristics AP300 (internal antenna) AP300 (external antenna) Wireless Data Communications Radio Characteristics User Environment Power Specifications Antenna Specifications Regulatory
Dimensions: 9.5 in. L x 7.0 in. W x 2.0 in. H
24.1 cm L x 17.8 cm W x 5.1 cm H 		9.25 in. L x 5.75 in. W x 1.0 in. H
23.5 cm L x 14.6 cm W x 2.54 cm H
Weight: 1.0 lbs/0.45kg 1.6 lbs/0.73kg
Part Number * : WSAP-5110-100-WWR
WSAP-5110-050-WWR 		WSAP-5100-100-WWR
WSAP-5100-050-WWR
Available Mounting Configurations: Ceiling-Mount (to suspended ceiling T-bars below tile); Wall-Mount Ceiling-Mount (above tile); Wall-Mount
Plenum Rated: No Yes, certified to UL 2043
LED Indicators: 2 LED indicators with multiple modes indicating 802.11a/802.11g Activity, Power, Adoption and Errors
Data Rates Supported: 802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9,11, 12, 18, 24, 36, 48, 54 Mbps
Network Standard: 802.11a, 802.11b, 802.11g
Wireless Medium: Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency Division Multiplexing (OFDM)
Uplink: Auto-sensing 10/100Base-T Ethernet
Frequency: 802.11b/g: 2.412 GHz to 2.484 GHz
802. 11a: 4.9 GHz to 5.875 GHz
FCC (US and Canada): 2.412 GHz to 2.462 GHz; 5.150 GHz to 5.250 GHz (UNII -1); 5.250 GHz to 5.350 GHz (UNII -2); 5.725 GHz to 5.825 GHz (UNII -3); 5.825 GHz to 5.850 GHz (ISM)
EU: 2.412 GHz to 2.472 GHz; 5.150 GHz to 5.250 GHz; 5.150 GHz to 5.350 GHz; 5.470 GHz to 5.725 GHz; (Country Specific)
Japan: 2.412 GHz to 2.484 GHz
4.900 GHz to 5.000 GHz; 5.150 GHz to 5.250 GHz
China: 2.412 GHz to 2.472 GHz 5.725 GHz to 5.850 GHz
Operating Channels: 802.11b/g: ETSI: 13; North America: 11; TELEC (Japan): 13
802.11a: ETSI: Country Specific; North America: 12; UNII I, II, III; (approval for 5.4-5.7 GHz pending); TELEC (Japan): 8
Nominal Transmitter Power: 802.11b/g:
17.5 dBm +/- 1 dBm @ 1, 2, 5.5, 11 Mbps
17.0 dBm +/- 1 dBm @ 6 and 9 Mbps
16.5 dBm +/- 1 dBm @ 12 and 18 Mbps
14.0 dBm +/- 1 dBm @ 24 and 36 Mbps
12.5 dBm +/- 1 dBm @ 48 and 54 Mbps

802.11a:
17.5 dBm +/- 1 dBm @ 6 and 9 Mbps
16.0 dBm +/- 1 dBm @ 12 and 19 Mbps
14.0 dBm +/- 1 dBm @ 24 and 36 Mbps
12.0 dBm +/- 1 dBm @ 48 and 54 Mbps
Receiver Sensitivity: 802.11b: 11 Mbps @ -84dBm; 5.5 Mbps @ -87dBm; 2 Mbps @ -88dBm; 1 Mbps @ -90dBm

802.11g: 54 Mbps @-68 dBm; 48 Mbps @ -70 dBm; 36 Mbps @ -75 dBm; 24 Mbps @-79 dBm
18 Mbps @ -81 dBm; 12 Mbps @-85 dBm; 9 Mbps @ -87 dBm; 6 Mbps @-88 dBm

802.11a: 54 Mbps @-68 dBm; 48 Mbps @ -70 dBm; 36 Mbps @ -75 dBm; 24 Mbps @-79 dBm
18 Mbps @ -81 dBm; 12 Mbps @-85 dBm; 9 Mbps @ -87 dBm; 6 Mbps @-88 dBm
Operating Temperature: 32°F to 104°F/0°C to 40°C -4°F to 122°F/-20°C to 50°C
Storage Temperature: -40°F to 158°F/-40°C to 70°C
Operating Humidity: 5%-95% (non-condensing)
Operating Altitude: 8000 ft./2438 m
Storage Altitude: 15000 ft./4572 m
Electrostatic Discharge: +/- 15 kV (Air), +/- 8 kV (Contact)
Operating Voltage: 48 VDC @ 7W (Typical), 36 VDC to 57 VDC (Range)
Operating Current: 145mA @ 48VDC (typical)
Integrated Power Over Ethernet Support: Standards-based IEEE 802.3af
Type: Integrated 2.4 GHz and 5.2 GHz Dual-Antenna Elements with diversity Two RSMA and two RBNC connectors for external antennas (not included)
Band: 2.4 GHz to 2.5 GHz; 4.9 GHz to 5.850 GHz (actual operating frequencies depend on regulatory rules and certification agency)
VSWR: 2.4 GHz: Less than 2:1
5.2 GHz: Less than 1.5:1 		(antenna-specific)
Gain: 2.4 GHz: 0.0 dBi
5.2 GHz: 3.0 dBi 		(antenna-specific)
Product Safety Certifications: UL 60950, cUL, EU EN 60950, TUV and UL 2043 (external Antenna)
Radio Approvals: FCC (USA), Industry Canada, CE (Europe) and TELEC (Japan)

*WS-2000-1C-ABG-WWR (WS2000 and 1 AP300 (802.11a/b/g) bundle);
WS-2000-2C-ABG-WWR (WS2000 and 2 AP300 (802.11a/b/g) bundle);
WS-2000-2C-BG-WWR (WS2000 and 2 AP300 (802.11b/g) bundle)
HOT LEVEL !!   *****
________________________

 

Bridges & Adapters

Give your desktop and laptop computers, PDAs, printers, cash registers and more the power of wireless connectivity.

With Motorola's robust family of client bridges and adapters, you can quickly and easily provide a wireless connection to your network for nearly any device. Connect notebook computers and PDAs to give your mobile workforce the power of anywhere, anytime network access. And eliminate the expense of wiring to connect stationary devices, such as desktop PCs, printers and cash registers.

 

CB3000 Client Bridge Extend affordable and secure 802.11a/b/g wireless connectivity to multiple Ethernet devices with no PC or PCI card slots — including cash registers, scales and time clocks.

Features Benefits
IEEE 802.11a/b/g Flexibility to connect to multiple network technologies
Multi-client support Affordable connectivity for up to 16 client devices
POS support Cost-effective wireless deployment of the market leading point-of-sale devices (IBM, NEC, and more)
IBM POS protocol support Cost-effective wireless deployment for point-of-sale devices
WEP 40/128, WPA and AES encryption; 802.1x support with PEAP, EAP/TLS, EAP/TTLS authentication Provides rigorous security for your data and network
Embedded secure web server Convenient anytime anywhere management
SNMP v2 support Integrates easily with standard enterprise management systems
Ad hoc mode (CB3000 to CB3000 – networking of all connected devices) Quickly and inexpensively enable the sharing of printers and other peripherals, server access and more

CB3000 Specifications

Physical Characteristics Software Specifications Compatibility Radio Characteristics Regulatory
Dimensions: 7.0 in. L x 4.0 in. W x 1.2 in. D
179 mm L x 102 mm W x 31 mm D
Interfaces: Ethernet Interface: RJ-45 10/100Base-T; 802.11a/b/g
LEDs: Power (Status/Error), WLAN (802.11a/802.11g), LAN (10/100 Mb)
Operating Temp: 32° to 122° F/0° to 50° C
Humidity: 10% – 90% non-condensing
Security: WPA2/802.11i; 802.1x Supplicant, PEAP, EAP/TLS, EAP/TTLS, Client Access Control List
Network Protocol Support: TCP/IP, DHCP, SNMP v2
Network Management: Embedded Secure Web server; SNMP v2 support, Discovery Tool included for all bridges in Layer 2 network
POS Protocol Support: RPL, PXE; Limit one RPL or PXE terminal per bridge
Standards: IEEE 802.11a/b/g; IEEE 802.3; IEEE 802.1d; 802.11i; 802.11h (DFS/TCP); HTTPS
Supported Devices: Windows-based PCs equipped with Ethernet cards; point-of-sale devices; network printers; thin clients; Mac/Apple machines; Linux/ Unix workstations; Ethernet-enabled appliances; and/or mix of all devices listed
Device Manager: Windows 2000, Windows XP
Frequency Range: 802.11a: 5.150 - 5.825 GHz
802.11b/g: 2.4 - 2.4835 GHz
Data Rate: 802.11a/g: 54, 48, 35, 24, 18, 12, 9 & 6 Mbps
802.11b: 11, 5.5, 2 & 1 Mbps
Part Number: 8CB-3000-0010-WWR
Approved Antennas: ML-2452-APA2-01R 3dBi/4dBi Dual Band Omni-Directional (included)
ML-2499-HPA3-01 5 dbi 802.11b/g Omni-Directional
ML-2499-SD3-01 Patch antenna, 3 dBi, 2.4 GHz
ML-2499-BYGA2-01 Yagi bridge antenna, 15 dBi, 35 deg beam
ML-5299-HPA1-01 Omni Antenna, 5 dBi, 5 GHz
ML-5299-WPNA1-01 Wall Mounting Panel Antenna, 5 GHz
Radio Sensitivity (minimum): 802.11b 1 Mbps – 97 dBm
2 Mbps – 93 dBm
5.5 Mbps – 91 dBm
11 Mbps – 85 dBm
802.11a 6 Mbps – 90 dBm
9 Mbps – 88 dBm
12 Mbps – 87 dBm
18 Mbps – 85 dBm
24 Mbps – 81 dBm
36 Mbps – 79 dBm
48 Mbps – 73 dBm
54 Mbps – 72 dBm 		802.11g 6 Mbps – 91 dBm
9 Mbps – 89 dBm
12 Mbps – 89 dBm
18 Mbps – 85 dBm
24 Mbps – 84 dBm
36 Mbps – 80 dBm
48 Mbps – 76 dBm
54 Mbps – 74 dBm
Nominal Transmitter Power: 802.11b/g 20.5 dBm+1/-1.5 dBm @ 1, 2, 5.5, 11 Mbps
20.5 dBm +1/-1.5 dBm @ 6, 9, 12, 18, 24 Mbps
18.5 dBm +1/-1.5 dBm @ 36 Mbps
17.5 dBm +1/-1.5 dBm @ 48 Mbps
16.5 dBm +1/-1.5 dBm @ 54 Mbps
802.11a 20.5 dBm +1/-1.5 dBm @ 6, 9, 12, 18, 24 Mbps
16.5 dBm +1/-1.5 dBm @ 36 Mbps
15.5 dBm +1/-1.5 dBm @ 48 Mbps
14.5 dBm +1/-1.5 dBm @ 54 Mbps
Modulation: DSSS (Direct Sequence Spread Spectrum)
OFDM (Orthogonal Frequency Division Multiplexing)
Range: Up to 1,000 ft./300 m in open environment (range varies based on environment)
Electrical and Mechanical Safety: cUL1950; EN60950 and IEC60950
EMC: FCC Part 15B; ICES-003 Class B; EU EN 301 489 Parts 1 & 17; EN 60601-1-2 (Medical)
Radio: FCC Part15.247, 15.205, 15.209, 15.207, 15.203, 15.407; Canada: RSS-210; EU EN 300 328 (2.4GHz), EN 301 893 (5GHz); Japan ARIB STD-66, 33 & T71

HOT LEVEL !!   *****
________________________

LA-5127 Wireless Networker CompactFlashR Radio Card Build secure enterprise mobility into your portable devices with the LA-5127 Wireless Networker? CompactFlashR Radio Card

Features Benefits
WPA2 and 802.1x compatible Provides robust standards-based security for Linux and Windows applications
Pre-emptive roaming Optimized network availability, improved wireless link reliability and enhanced mobility
Dynamic load balancing Increased throughput in cluttered, real-world environments
Power management Extended operation time on-station between charges
Limited modular worldwide regulatory approval backed by Motorola service/support Potentially accelerates time-to-market, reducing product development time and cost
Comprehensive software development kit Provides the tools for customizing the LA-5127 for embedded mobile applications
Design support and technical service Enables custom solutions optimized for each OEM
Hard MAC with on-card memory Easily upgradeable with substantial memory for future features and functions
Common code-base radio platform Leverages end-product driver development and regulatory efforts; accelerates product migration path
Specification Details
Physical Characteristics Type I/II CF card (extended)
Connectorized/external antenna:
1.69 in. W x 2.18 in L x .13 in. H
42.8 mm W x 55.4 mm L x 3.3 mm H
Internal antenna:
1.69 in. W x 2.18 in L x .23 in. H
42.8 mm W x 55.4 mm L x 5.9 mm H
50-pin CF card connector
Operating Environment +32° to 131° F/0° to 55°C; Up to 95% relative humidity, non-condensing
Conducted Power: 15dBm typical (not including antenna gain, varies with data rate)
Input Voltage: 3.3V ± 5%
Input Current (typical): Transmit: 500ma; Receive: 280ma;
In-rush: 165ma; Standby/idle: 17ma
System Operational Modes: Continuous power mode (297mA for 20% Tx duty cycle); fast power-save mode; maximum power-save mode
Network Standard Compatibility 802.11b - 2.4GHz band, 5.5Mbit/s and 11Mbit/s physical RF spec.
802.11g - 2.4GHz band, 54Mbit/s physical RF spec.
802.11d - international country-to-country roaming
802.11i - enhanced security, Wi-Fi Protected Access (WPA2) with AES
Frequency Range 2.4 to 2.5GHz
Operating Channels 11 (U.S. FCC); 13 (EU ETSI); 14 (Japan)
Modulation Type CCK, DBPSK, DQPSK, QPSK, OFDM (16 and 64QAM)
Data Rate 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and up to 54Mbps
Range 300 feet (typical, office environment)
Wireless Security: WEP: 64/128 bit with AES; WPA/WPA2 personal and enterprise; Advanced encryption standard (AES)
Antenna Two coaxial antenna connectors (Hirose U.FL-R-SMT, or equivalent)
Two-antenna diversity
System Interface Mechanical: 50 pin CF card connector
Electrical: 16-bit PC Card
Operating Systems Linux 2.4 and Windows CE 5.0
Wi-Fi CERTIFIEDR Interoperability WPA/WPA2 Personal; WPA/WPA2
Enterprise; EAP-TLS; EAP-TLS/
MSCHAPv2; PEAPv0/EAP-MSCHAPv2;
PEAPv1/EAP-GTC; EAP-SIM
Electrical Safety: Certified to UL / cUL 60950-1, IEC / EN60950-1
RF Compliance USA: FCC Part 15.247; CANADA: RSS-210;
EUROPEAN UNION: EN 300 328;
JAPAN: ARIB STD-T33, ARIB STD-T66;
AUSTRIALIA: AS/NZS 4268
EMI/EMS: North America : FCC Part 15
Canada : ICES 003 Class B
EU: EN55022 Class B, EN 301 489-1, EN 310 489-17,
EN 60601-1-2
Australia: AS/NZS CISPRA 22

HOT LEVEL !!   *****
________________________

LA-5137 Wireless Networker? CompactFlashR Radio Card Deliver industry-standard security in your portable devices

Features Benefits
802.11a/b/g Takes advantage of three radio bands when splitting network traffic to optimize security and availability features
WPA/WPA2 and 802.1x (AES) compatible Provides robust standards-based security for Linux and Windows applications
Pre-emptive roaming Optimized network availability, improved wireless link reliability and enhanced mobility
Dynamic load balancing Increased throughput in cluttered, real-world environments
Power management Extended operation time on-station between charges
Limited modular worldwide regulatory approval backed by Motorola service/support Potentially accelerates time-to-market, reducing product development time and cost
Comprehensive software development kit Provides the tools for customizing the LA-5127 for embedded mobile applications
Design support and technical service Enables custom solutions optimized for each OEM
Hard MAC with on-card memory Easily upgradeable with substantial memory for future features and functions
Common code-base radio platform Leverages end-product driver development and regulatory efforts; accelerates product migration path
Specification Details
Network Standard Compatibility: 802.11a - 5GHz band, Up to 54Mbit/s physical RF spec.; 802.11b - 2.4GHz band, Up to 11Mbit/s physical RF spec.; 802.11g - 2.4GHz band, Up to 54Mbit/s physical RF spec.; 802.11d - international country-to-country roaming; 802.11i - enhanced security, Wi-Fi Protected Access (WPA2) with AES
Frequency Range: 4.9 to 5.85GHz; 2.4 to 2.5GHz
Operating Channels: 802.11a: 24 (U.S. FCC); 19 (EU ETSI); 35 (Japan) 802.11b/g: 11 (U.S. FCC); 13 (EU ETSI); 14 (Japan)
Modulation Type:: CCK, DBPSK, DQPSK, QPSK, OFDM (BPSK and 16/64QAM)
Data Rate: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54Mbps
Range: 4000 ft. (typical max., outdoor)
300 ft. (typical max., office environment)
Radiated Power: Up to 18dBm (including antenna gain, varies with data rate/channels)
Input Voltage: 3.3V ± 5%
Input Current (typical): Transmit: 500ma (maximum continuous transmit power); Receive: 280ma (maximum continuous receive power); Standby/idle: 17ma (while associated to the network)
On-Card Memory: 8MB of SDRAM (code space for new features/functions/standards)
System Operational Modes: Continuous power mode (297mA for 20% Tx duty cycle); Fast power-save mode; Maximum power-save mode
System Interface: Mechanical: 50 pin CF card connector Electrical: 16-bit PC Card
Antenna: Two coaxial antenna connectors (Hirose U.FL-R-SMT, or equivalent)
Two-antenna diversity
Physical Characteristics: Type I/II CF card (extended) 1.69 in. wide, 2.18 in. long, 0.13 in. thick 50-pin CF card connector
Wireless Security: Wireless equivalent protection (WEP: 64/128 bit, with AES ) Wireless protected access (WPA) WPA2 (802.11i)
Advance encryption standard (AES )
Interoperability: WPA/WPA2; EAP-TLS; EAP-TLS/ MSCHAPv2; PEAPv0/EAP-MSCHAPv2; PEAPv1/EAP-GTC; EAP-SIM
Operating Environment: +0 to +55°C; Up to 95% relative humidity, non-condensing; Vibration to withstand .02g2/Hz, random, sine, 20-2k Hz; Mechanical shock to withstand 50 G peak, 11 ms, half sine; ESD to withstand 1.5KV
Electrical Safety: Certified to UL / cUL 60950-1, IEC / EN60950-1
RF Compliance USA: FCC Part 15.247, 15.407 CANADA: RSS-210; EUROPEAN UNION: EN 300 328, EN 301 893; JAPAN: ARIB STD-T33, ARIB STD-T66, ARIB STD-T71; AUSTRIALIA: AS/NZS 4268
EMI/EMS: North America : FCC Part 15
Canada : ICES 003 Class B
EU: EN55022 Class B, EN 301 489-1,
EN 310 489-17, EN 60601-1-2
Australia: AS/NZS CISPRA 22
Operating Systems: Linux 2.4 and Windows CE 5.0
Applications: Mobile Companion (profile set-up, configuration and management)

HOT LEVEL !!   *****
________________________

LA4137 Wireless Networker Compact Flash Card Provide plug-and-play 802.11b wireless connectivity for any device with a CompactFlash card slot so users can stay connected to the corporate network, no matter where they are.

Features Benefits
11 Mbps direct sequence (DS) high data rate transmission Supports bandwidth-demanding applications and high-speed data transmission
Supports both Pocket PC and Windows PC operating systems Flexible to work with both your PDA and your notebook PC
Wi-Fi certified (IEEE 802.11b compliant) Interoperable wireless networking based on the high rate standard
CompactFlash form factor
Type I/II 		Supports a variety of popular computing devices, from handhelds to laptops
Automatic data rate and channel selection of 11, 5.5, 2, and 1 Mbps Optimized throughput and range for continuous connectivity
Wireless software upgrade Simplified update and maintenance
Wired Equivalent Privacy (WEP) encryption and decryption support Powerful data security at 40 and 128 bits
User-friendly client tools Simplified administration and maintenance
Advanced Power Management and Suspend on WLAN Very low power consumption delivers extended battery life for client devices

Spectrum24R High Rate Wireless Networker? CompactFlash? Card Specifications

User Profiles Compatibility Radio Characteristics Network Characteristics
Vertical industries: Healthcare, education, retail, manufacturing, hospitality and many other industries with 802.11b wireless LAN access
Corporate Pocket PC PDA users: With a Wi-Fi wireless LAN at the office, or a subscription to a public wireless LAN
Pocket PC users: With an 802.11b wireless network solution at home
Client devices: Pocket PC 2000 Devices:
  • Casio Cassiopeia E-125 Pocket PC
  • Compaq iPAQ H 3100 and 3600 Series Pocket PC (requires CF Jacket accessory or PC Card Jacket accessory and a CF-to-PC Card adapter)
  • HP Jornada 520 and 540 Series Pocket PCs
Pocket PC 2002 Devices
Handheld PC 2000 Devices
Notebook PC with Windows 95/98/ME/ 2000/XP and a Type II PC Card (PCMCIA) slot (requires a CF-to-PC Card adapter)
Handera 330 - driver available from www.handera.com
Frequency Range: U.S., Europe, Japan product covering 2.4 to 2.5 GHz, programmable for different country regulations
Data Rate: 11 Mbps per channel maximum with Dynamic Rate Scaling to 5.5, 2 and 1 Mbps
Output Power: 100 mW, programmable for different country regulations
Power Management: Continuously Aware and Power Saving Modes
Range: Data throughput scaled to support up to 300 ft./91 m indoor/outdoor
TX Maximum Radiated EIRP: FCC regulations part 15.247 in U.S.; ETS 300 328 in Europe; RCR STD-33 in Japan
Modulation: Direct Sequence Spread Spectrum (DSSS) with BPSK (1 Mbps), QPSK (2 Mbps), and CCK (5.5 and 11 Mbps)
TX Out-of-Band Emissions: FCC regulations part 15.247, 15.205, 15.209 in U.S.; ETS 300 328 in Europe; RCR STD-33 in Japan
Operating Temperature: -4° to 158° F/-20° to 70° C
Storage Temperature: -22° to 176° F/-30° to 80° C
Driver Software Supported: Pocket PC (CE 3.0 9348), HPC 2000, Pocket PC 2002, Windows 95/98/ME/2000/XP.
Access Protocol: CSMA/CA
Roaming: Virtually instantaneous

HOT LEVEL !!   *****
________________________

 

 

 

Wireless Switches

RFS7000 Wireless RF Switch Get the performance and scalability you need to propel your large, high-bandwidth wireless network.

Features Benefits
Centralized multicore/multithreaded architecture Security and high performance for bandwidth-heavy applications; a single point of management lowering the overall cost of network deployment and administration
Unified RF management platform Improve business process flow and enable data sharing by managing multiple RF networks, such as wi-fi , RFID, 802.11n and Wi-MAX, on a single switch
L2 and L3 roaming Seamless roaming of mobile clients across even complex distributed networks
Comprehensive layered security Exceptional level of data and network protection without sacrificing fast roaming
Clustering and load balancing Ensures an "always-on" highly available network for superior performance; supports multiple levels of redundancy and failover capabilities

RFS7000 Specifications

Packet Forwarding Wireless Networking Network Security Optimized Wireless QoS System Resiliency & Redundancy Management Physical Characteristics Power Requirements User Environment Regulatory Part Numbers
802.1D-1999 Ethernet bridging; 802.11-.802.3 bridging; 802.1Q VLAN tagging & trunking; proxy ARP; IP packet steering-redirection
Wireless LAN: Supports 250 WLANs; multi-ESS/BSSID traffic segmentation; VLAN to ESSID mapping; Auto Assignment of VLANs (on RADIUS authentication); Power Save Protocol Polling; pre-emptive roaming; congestion control
Access ports: Supports 1-256 "thin" access ports; automatic access port adoption with ACLs; access port load balancing; direct sequence access point-to-access port conversion
Layer 2 or Layer 3 deployment of Access Ports
Layer 3 Mobility (Inter-Subnet Roaming)
Supported access ports and access points: AP300 (802.11a/b/g ready)(L2 or L3 Deployments) WLAN – GRE Tunnel Mapping
Radio frequency automatic channel select (ACS); transmit power control management: (TPC); country code-based RF configuration; 802.11b – 3 non-overlapping channels; 802.11a—11 non-overlapping channels; 802.11g—3 non-overlapping channels (ready)
Packet filtering/Access Control Lists (ACLs): L2/3/4 stateful packet analysis; network address translation (NAT)
Authentication: Access Control Lists (ACLS); pre-shared keys (PSK);: 802.1x/EAP—transport layer security (TLS), tunneled transport layer security (TTLS), protected EAP (PEAP); Kerberos Integrated AAA/RADIUS Server with native support for EAP-TTLS and EAP-PEAP (includes a built in user name/ password database; supports LDAP)
Transport encryption: WEP 40/128 (RC4), KeyGuard, WPA—TKIP, WPA2-CCMP (AES), WPA2-TKIP
Secure Guest Access (HotSpot Provisioning): Local Web Based Authentication; URL Redirection for User Login; Customizable Login/Welcome Pages; Support for external Authentication/Billing Systems
RADIUS Support (Standard) (Standard and Symbol Vendor Specific Attributes):
  • User Based VLANs
  • MAC Based Authentication (Standard)
  • User Based QoS (Symbol VSA)
  • Location Based Authentication (Symbol VSA)
  • Allowed ESSIDs (Symbol VSA)
RF priority: 802.11 traffic prioritization and precedence
Wi-Fi multimedia extensions: WMM-power save with Admission Control
Classifi cation & marking: Layer 1-4 packet classifi cation; 802.1p VLAN priority; DiffServ/TOS
Active:Standby; Active:Active and 1:Many redundancy with access port and MU load balancing; self healing (on detection of RF interference or loss of RF coverage)
Command line interface (serial, telnet, SSH); secure Web-based GUI (SSL); SNMP v1/v2/v3; SNMP traps—40+ user configurable options; Syslog; TFTP Client; secure network time protocol (SNTP); text-based switch configuration files; DHCP (client/server/relay), switch auto-configuration and firmware updates with DHCP options; multiple user roles (for switch access); Syslog, MIBs (MIB-II, Etherstats, wireless switch specific monitoring and configuration)
Form factor: 1U Rack Mount
Dimensions: HxWxD = 44.45mm x 440mm x 390.8mm
Weight: 13.5lbs / 6.12kg
Physical interfaces: -4 10/100/1000 Cu/SFP Ethernet interfaces, 1 10/100 OOB port, 1 CF card slot, 2 USB slots, 1 serial port (RJ45 style)
MTBF: >65,000 Hours
AC input voltage: 90 – 264 VAC 50/60Hz
Max AC input current: 6A@115 VAC, 3A@230 VAC
Input frequency: 47 Hz to 63 Hz
Operating temperature: 0C to 40C
Storage temperature: -40C to 70C
Operating humidity: 5% to 85% (w/o condensation)
Storage humidity: 5% to 85% (w/o condensation)
Product Safety: UL / cUL 60950-1, IEC / EN60950-1
EMC Compliance: FCC (USA), Industry Canada, CE (Europe), VCCI (Japan), C-Tick (Australia/New Zealand)
RFS-7010-100R0-WR: Zero Port Wireless Switch
RFS-7010-10010-WR: 128 Port Wireless Switch
RFS-7010-10020-WR: 256 Port Wireless Switch

HOT LEVEL !!   *****
________________________

WS5100 Wireless Switch Get all the benefits of next-generation wireless switch architecture with the capacity to support the largest enterprises. Ideal for the healthcare, educational and retail industries.

Features Benefits
Centralized architecture A single point of entry that can be centrally managed, easily secured, and lowers the overall cost of deployment and management.
L2 and L3 roaming Supports inter-subnet roaming without additional client support. Seamless roaming of mobile clients within a simplified wireless network design.
Security Comprehensive, layered security capabilities including WPA2-CCMP (with 802.11i fast roaming options), integrated RADIUS Server, IPSec VPN Gateway, Secure Guest Access Provisioning and advanced wireless intrusion detection. Exceptional level of data and network protection without sacrificing fast roaming.
Clustering and load balancing Ensures loads are balanced between access ports to ensure quality application performance; supports multiple levels of redundancy in case of failure.
Mobility enablers Virtual AP, Pre-emptive roaming, transmit power control, power save protocol, self-healing (triggered on loss or disruption of RF coverage). “Virtual AP” provides better control of broadcast traffic and enables multiple mobile and wireless applications with quality of service when network is congested. Pre-emptive roaming ensures Symbol mobile devices roam before signal quality degrades; PSP optimizes battery life; Self-healing provides continuous network coverage in the event of disruption.
Quality of Service (QoS) Enhanced voice and video capabilities; prioritizes network traffic to minimize latency and provide optimal responsiveness to all users. Wi-Fi Multimedia Extensions (WMM-Power Save with Admission Control) for enhanced multimedia application support; improved battery life and capacity.

WS5100 Specification Highlights

Packet Forwarding Wireless Networking Network Security Optimized Wireless QoS System Resiliency & Redundancy Management Physical Characteristics Power Requirements User Environment Regulatory Part Numbers
802.1D-1999 Ethernet bridging; 802.11-.802.3 bridging; 802.1Q VLAN tagging & trunking; proxy ARP; IP packet steering-redirection
Wireless LAN: Supports 32 WLANs; multi-ESS/BSSID traffic segmentation; VLAN to ESSID mapping; auto assignment of VLANs (on RADIUS authentication); power save protocol polling; pre-emptive roaming; congestion control
Access ports: Supports 1-48 “thin” access ports; automatic access port adoption with ACLs; access port load balancing; direct sequence access point-to-access port conversion
Layer 2 or Layer 3 deployment of access ports
Layer 3 mobility (inter-subnet roaming)
Supported access ports and access points: Access ports – AP100 (802.11b) (L2 deployment only); AP300 (802.11a/b/g ready) (L2 or L3 deployments)
Access points – AP4131 (L2 deployments only)
WLAN - GRE tunnel mapping
Radio frequency automatic channel select (ACS); transmit power control management (TPC); country code-based RF configuration; 802.11b – 3 non-overlapping channels; 802.11a-11 non-overlapping channels; 802.11g-3 non-overlapping channels
Packet filtering/Access control lists (ACLs): L2/3/4 stateful packet analysis; network address translation (NAT)
Authentication: Access Control Lists (ACLS); pre-shared keys (PSK); 802.1x/EAP-transport layer security (TLS), tunneled transport layer security (TTLS), protected EAP (PEAP); Kerberos Integrated AAA/RADIUS server with native support for EAP-TTLS and EAP-PEAP (includes a built in user name/password database; supports LDAP)
Transport encryption: WEP 40/128 (RC4), KeyGuard, WPA-TKIP, WPA2-CCMP (AES), WPA2-TKIP
IPSec VPN gateway (support for up to 100 tunnels): Supports DES, 3DES and AES encryption
Secure guest access (HotSpot provisioning): Local Web-based authentication; URL redirection for user login; customizable login/welcome pages; support for external authentication/billing systems
RADIUS support (standard and Motorola vendor specific attributes):
  • User-based VLANs (standard)
  • MAC-based authentication (standard)
  • User-based QoS (Motorola VSA)
  • Location-based authentication (Motorola VSA)
  • Allowed ESSIDs (Motorola VSA)
RF Priority: 802.11 traffic prioiritization and precedence
Wi-Fi multimedia extensions: WMM-power save with admission control
Classification & Marking: Layer 1-4 Packet Classification; 802.1p VLAN Priority; DiffServ/TOS
Active: Standby, Active:Active and 1:Many redundancy with access port and MU load balancing; self healing (on detection of RF interference or loss of RF coverage)
Command line interface (serial, telnet, SSH); secure Web-based GUI (SSL); SNMP v1/v2/v3; SNMP traps-40+ user configurable options; Syslog; TFTP Client; secure network time protocol (SNTP); text-based switch configuration files; DHCP (client/server/relay), switch auto-configuration and firmware updates with DHCP options; multiple user roles (for switch access); Syslog, MIBs (MIB-II, Etherstats, wireless switch specific monitoring and configuration)
Form Factor: Standard 1RU
Dimensions: 1.73 in. H x 16.89 in. W x 15.93 in. D
43.9 mm H x 429 mm W x 404.6 mm D
Weight: 13.75 lbs./6.25 kg
Physical Interfaces: RS232 serial console port; 10/100/1000 Ethernet ports
MTBF: >75,000 Hours
AC Input Voltage: 100-240 VAC
Max AC Input Current: 6A@115 VAC, 3A@230 VAC
Max Power Consumption: 100-240 VAC, 50/60 Hz, 3A, 240 VAC, 50/60 Hz, 1.5A
Input Frequency: 47 Hz to 63 Hz
Operating Temperature: 50°F to 95°F/10°C to 35°C
Storage Temperature: 40°F to 149°F/-40°C to 65°C
Operating Humidity: 5%-85% (w/o condensation)
Storage Humidity: 5% - 95% (w/o condensation)
Operating Altitude: 50 ft. to 10,000 ft./16 m to 3,048 m
Storage Altitude: 50 ft. to 35,000 ft./16 m to 10,600 m
Safety Certifications: FCC (Art.15, part B), Industry Canada, CE, VCCI, C-Tick, BSMI
EMI Compliance: UL 1950, cUL (Canada), VDE GS, DENAN (Japan), CB Cert
WS5100-06-WWR
WS5100-12-WWR
WS5100-18-WWR
WS5100-24-WWR
WS5100-30-WWR
WS5100-36-WWR